Rubber Membrane HLL Kits

Diversiline Horizontal Lifeline Kits for Rubber Membrane Roofs

The latest addition to our Connect Safe family of safety products is Diversiline, a permanent horizontal lifeline kit for fall restraint and fall arrest applications.

Designed for fast and easy installation on standing seam, corrugated metal, and membrane roofs, each Diversiline kit comes complete with pre-swaged 316 stainless cable, energy absorbing tip-over posts, mounting fasteners and related hardware.

Diversiline is available in straight line, L, and U configurations in 30′, 40′, 50′, and 60’ lengths.

Because the system is pre-engineered and self-installed, Diversiline offers significant cost savings over custom engineered horizontal lifeline systems.  And unlike temporary lifeline systems that must attach to structure rated at 5,000 lbs, the kit comes with complete engineering documentation and comprehensive instructions to ensure personnel safety and OSHA compliance.

In addition to stock horizontal lifeline kits, Diversified Fall Protection also designs, manufactures, and installs custom-engineered horizontal lifelines.

Features

  • Pre-swaged 8mm 316 stainless steel cable
  • Hex swage tensioner and stainless steel traveler
  • Energy absorbing tip-over anchor posts
  • All mounting fasteners and hardware
  • Electro-polished components for long service life
  • Conforms to EN 795, OSHA, AS/NZ, standards and has been tested to both EN795 Class A and C Standards

OSHA Regulations

  • Horizontal Lifelines
    • 1926.502(d)(8) Horizontal lifelines shall be designed, installed, and used, under the supervision of a qualified person, as part of a complete personal fall arrest system, which maintains a safety factor of at least two.
  • Personal Fall Arrest Systems
    • 1926.502(d)(16) Personal fall arrest systems, when stopping a fall, shall:
    • 1926.502(d)(16)(ii) limit maximum arresting force on an employee to 1,800 pounds (8 kN) when used with a body harness;
    • 1926.502(d)(16)(iii) be rigged such that an employee can neither free fall more than 6 feet (1.8 m), nor contact any lower level;
    • 1926.502(d)(16)(iv) bring an employee to a complete stop and limit maximum deceleration distance an employee travels to 3.5 feet (1.07 m); and,
    • 1926.502(d)(16)(v) have sufficient strength to withstand twice the potential impact energy of an employee free falling a distance of 6 feet (1.8 m), or the free fall distance permitted by the system, whichever is less.

Benefits

  • Continuous pass through technology for hands free access
  • Unobtrusive design is concealed from view at ground level
  • Cost-effective alternative to custom engineered lifeline systems
  • Safe and secure alternative to temporary lifeline systems
  • Designed for customer installation to save time and money

Did You Know?

It is the responsibility of the employer to provide prompt rescue of their workers in the event of a fall or assure that their workers are able to self rescue?